W83627DHG Datasheet, PDF (98/268 Pages) Winbond – WINBOND LPC I/O

W83627DHG
Bit 0:
1: Enable battery voltage monitor. When this bit changes from zero to one, it takes one monitor
cycle time to update the VBAT reading value register.
0: Disable battery voltage monitor.
8.53 Critical Temperature and Current Mode Enable Register - Index 5Eh (Bank 0)
Register Location:
5Eh
Power on Default Value:
04h
Attribute:
Read/Write
Size:
8 bits
7 6 54 3 2 1 0
Reserved
EN_SYSTIN Current Mode
EN_CPUTIN Current Mode
EN_AUXTIN Current Mode
EN_SYSFANOUT Critical TEMP
EN_CPUFANOUT Critical TEMP
EN_AUXFANOUT Critical TEMP
EN_CPUFANOUT1 Critical TEMP
Bit 7:
1: Enable CPUFANOUT1 critical temperature protection.
0: Disable CPUFANOUT1 critical temperature protection. (Default)
Bit 6:
1: Enable AUXFANOUT critical temperature protection.
0: Disable AUXFANOUT critical temperature protection. (Default)
Bit 5:
1: Enable CPUFANOUT0 critical temperature protection.
0: Disable CPUFANOUT0 critical temperature protection. (Default)
Bit 4:
1: Enable SYSFANOUT critical temperature protection.
0: Disable SYSFANOUT critical temperature protection. (Default)
Bit 3: Enable AUXTIN Current Mode.
1: Temperature sensing of AUXTIN by Current Mode.
0: Temperature sensing of AUXTIN depends on the setting of Index 5Dh and 59h. (Default)
Bit 2: Enable CPUTIN Current Mode.
1: Temperature sensing of CPUTIN by Current Mode. (Default)
0: Temperature sensing of CPUTIN depends on the setting of Index 5Dh and 59h.
Bit 1: Enable SYSTIN Current Mode.
1: Temperature sensing of SYSTIN by Current Mode.
0: Temperature sensing of SYSTIN depends on the setting of Index 5Dh and 59h. (Default)
Bit 0: Reserved.
Publication Release Date: Aug, 22, 2007
-86-
Version 1.4