W83627DHG Datasheet, PDF (81/268 Pages) Winbond – WINBOND LPC I/O

W83627DHG
8.23 Tolerance of Target Temperature or Target Speed Register - Index 14h (Bank
0)
Register Location:
14h
Power on Default Value: 00h
Attribute:
Read/Write
Size:
8 bits
7 6 5 4 32 1 0
AUXTIN Target Temperature Tolerance
/ AUXFANIN Target Speed Tolerance
Reserved
(1)In Thermal Cruise^TM mode:
Bit 3-0: Tolerance of AUXTIN Target Temperature.
(2)In Fan Speed Cruise^TM mode:
Bit 3-0: Tolerance of AUXFANIN0 Target Speed.
8.24 AUXFANOUT Stop Value Register - Index 15h (Bank 0)
Register Location:
15h
Power on Default Value: 01h
Attribute:
Read/Write
Size:
8 bits
7 6 5 4 32 1 0
AUXFANOUT Stop Value
In Thermal Cruise^TM mode, the AUXFANOUT value decreases to this eight-bit value if the temperature
stays below the lowest temperature limit. This value should not be zero.
Please note that Stop Value does not mean that the fan really stops. It means that if the temperature
keeps below low temperature limit, then the fan speed keeps on decreasing until reaching a minimum
value, and this is Stop Value.
Publication Release Date: Aug, 22, 2007
-69-
Version 1.4