W83627DHG Datasheet, PDF (95/268 Pages) Winbond – WINBOND LPC I/O

W83627DHG
1: Enable BEEP output.
0: Disable BEEP output. (Default)
Bit 1: BEEP output control for VIN0 if the monitored value exceeds the threshold value.
1: Enable BEEP output.
0: Disable BEEP output. (Default)
Bit 0: BEEP output control for CPUVCORE if the monitored value exceeds the threshold value.
1: Enable BEEP output.
0: Disable BEEP output. (Default)
8.48 BEEP Control Register 2 - Index 57h (Bank 0)
Register Location:
57h
Power on Default Value:
80h
Attribute:
Read/Write
Size:
8 bits
7 6 5 4 32 1 0
EN_VIN1_BP
EN_VIN2_BP
EN_VIN3_B
PEN_AUXFANIN0_BP
EN_CASEOPEN_BP
EN_AUXTIN_BP
EN_VIN4_BP
EN_GBP
Bit 7: Global BEEP Control.
1: Enable global BEEP output. (Default)
0: Disable all BEEP output.
Bit 6: BEEP output control for VIN4 if the monitor value exceeds the limit value.
1: Enable BEEP output.
0: Disable BEEP output. (Default)
Bit 5: BEEP output control for temperature AUXTIN if the monitored value exceeds the threshold value.
1: Enable BEEP output.
0: Disable BEEP output. (Default)
Bit 4: BEEP output control for CASEOPEN if the case has been opened.
1: Enable BEEP output.
0: Disable BEEP output. (Default)
Bit 3: BEEP output control for AUXFANIN0 if the monitored value exceeds the threshold value.
1: Enable BEEP output.
0: Disable BEEP output. (Default)
Bit 2: BEEP output control for VIN3 if the monitored value exceeds the threshold value.
1: Enable BEEP output.
0: Disable BEEP output. (Default)
Bit 1: BEEP output control for VIN2 if the monitored value exceeds the threshold value.
1: Enable BEEP output.
Publication Release Date: Aug, 22, 2007
-83-
Version 1.4