W83627DHG Datasheet, PDF (222/268 Pages) Winbond – WINBOND LPC I/O

W83627DHG
CR FEh. (GPIO3 Event Route Selection Register; Default 00h)
BIT READ / WRITE
DESCRIPTION
7
R/W
Reserved.
0: Disable GP35 event route to PSOUT#.
6
R/W
1: Enable GP35 event route to PSOUT#.
0: Disable GP31 event route to PSOUT#.
5
R/W
1: Enable GP31 event route to PSOUT#.
4
R/W
0: Disable GP30 event route to PSOUT#.
1: Enable GP30 event route to PSOUT#.
3
Reserved.
0: Disable GP35 event route to PME#.
2
R/W
1: Enable GP35 event route to PME#.
0: Disable GP31 event route to PME#.
1
R/W
1: Enable GP31 event route to PME#.
0: Disable GP30 event route to PME#.
0
R/W
1: Enable GP30 event route to PME#.
20.12 Logical Device B (Hardware Monitor)
CR 30h. (Default 00h)
BIT READ / WRITE
DESCRIPTION
7~1 Reserved.
0: Logical device is inactive.
0
R/W
1: Logical device is active.
CR 60h, 61h. (Default 00h, 00h)
BIT READ / WRITE
DESCRIPTION
7~0
R/W
These two registers select the HM base address <100h : FFEh> along a
two-byte boundary.
CR 70h. (Default 00h)
BIT READ / WRITE
DESCRIPTION
7~4 Reserved.
3~0
R/W
These bits select the IRQ resource for HM.
-210-
Publication Release Date: Aug, 22, 2007
Version 1.4