W83627DHG Datasheet, PDF (119/268 Pages) Winbond – WINBOND LPC I/O

W83627DHG
Bit 2: Smart Fan of AUXFANIN warning status.
1: Selected temperature has been over the target temperature for three minutes at full fan speed
in Thermal Cruise^TM mode.
0: Selected temperature has not reached the warning range.
Bit 1: VBAT Voltage status.
1: VBAT voltage is over or under the allowed range.
0: VBAT voltage is in the allowed range.
Bit 0: 3VSB Voltage status.
1: 3VSB voltage is over or under the allowed range.
0: 3VSB voltage is in the allowed range.
8.95 Reserved Register - Index 5Ch ~ 5Fh (Bank 4)
8.96 Value RAM 2 ⎯ Index 50h-59h (Bank 5)
ADDRESS A6-A0
50h
51h
52h
53h
54h
55h
56h
57h
58h
59h
5Ah
5Bh
5Ch
DESCRIPTION
3VSB reading
VBAT reading. The reading is meaningless unless EN_VBAT_MN (Bank0
Index 5Dh, bit0) is set.
Reserved
AUXFANIN1 reading
Note: This location stores the number of counts of the internal clock per
revolution.
3VSB High Limit
3VSB Low Limit
VBAT High Limit
VBAT Low Limit
Reserved
Reserved
Reserved
Reserved
AUXFANIN1 Fan Count Limit
Note: It is the number of counts of the internal clock for the Low Limit of
the fan speed.
8.97 Reserved Register - Index 50h ~ 57h (Bank 6)
-107-
Publication Release Date: Aug, 22, 2007
Version 1.4