W83627DHG Datasheet, PDF (96/268 Pages) Winbond – WINBOND LPC I/O

W83627DHG
0: Disable BEEP output. (Default)
Bit 0: BEEP output control for VIN1 if the monitored value exceeds the threshold value.
1: Enable BEEP output.
0: Disable BEEP output. (Default)
8.49 Chip ID - Index 58h (Bank 0)
Register Location:
58h
Power on Default Value: C1h
Attribute:
Read Only
Size:
8 bits
7 6 5 4 32 1 0
CHIPID
Bit 7-0: Winbond Chip ID number. Default C1h.
8.50 Diode Selection Register - Index 59h (Bank 0)
Register Location:
59h
Power on Default Value: 70h
Attribute:
Read/Write
Size:
8 bits
76 5 4 3 210
CPUFANIN1 DIV_B0
CPUFANIN1 DIV_B1
AUXFANIN1 DIV_B0
AUXFANIN1 DIV_B1
SELPIIV1
SELPIIV2
SELPIIV3
AUXFANIN1 DIV_B2
Bit 7: AUXFANIN1 Divisor, bit 2. (See VBAT Monitor Control Register - Index 5Dh (Bank 0))
Bit 6: Diode mode selection for temperature AUXTIN, if Index 5Dh, bit 3 is set to 1.
1: CPU-compatible thermal diode.
0: Reserved.
Bit 5: Diode mode selection for temperature CPUTIN, if Index 5Dh, bit2 is set to 1.
1: CPU-compatible thermal diode.
0: Reserved.
Publication Release Date: Aug, 22, 2007
-84-
Version 1.4