M16C29 Datasheet, PDF (440/499 Pages) Renesas Technology Corp – RENESAS MCU M16C FAMILY / M16C/Tiny SERIES

M16C/29 Group
21. Electrical Characteristics (V-version)
Timing Requirements
VCC = 5V
(VCC=5V, VSS=0V, at Topr=-40 to 125°C unless otherwise specified)
Table 21.87 Timer A Input (Counter Input in Event Counter Mode)
Symbol
Parameter
tc(TA)
tw(TAH)
tw(TAL)
TAiIN Input Cycle Time
TAiIN Input High ("H") Width
TAiIN Input Low ("L") Width
Standard
Unit
Min.
Max.
100
ns
40
ns
40
ns
Table 21.88 Timer A Input (Gating Input in Timer Mode)
Symbol
Parameter
tc(TA)
tw(TAH)
tw(TAL)
TAiIN Input Cycle Time
TAiIN Input High ("H") Width
TAiIN Input Low ("L") Width
Standard
Unit
Min.
Max.
400
ns
200
ns
200
ns
Table 21.89 Timer A Input (External Trigger Input in One-shot Timer Mode)
Symbol
Parameter
Standard
Unit
Min.
Max.
tc(TA)
TAiIN Input Cycle Time
200
ns
tw(TAH)
TAiIN Input High ("H") Width
100
ns
tw(TAL)
TAiIN Input Low ("L") Width
100
ns
Table 21.90 Timer A Input (External Trigger Input in Pulse Width Modulation Mode)
Symbol
Parameter
Standard
Unit
Min.
Max.
tw(TAH)
TAiIN Input High ("H") Width
100
ns
tw(TAL)
TAiIN Input Low ("L") Width
100
ns
Table 21.91 Timer A Input (Counter Increment/decrement Input in Event Counter Mode)
Symbol
Parameter
tc(UP)
tw(UPH)
tw(UPL)
tsu(UP-TIN)
th(TIN-UP)
TAiOUT Input Cycle Time
TAiOUT Input High ("H") Width
TAiOUT Input Low ("L") Width
TAiOUT Input Setup Time
TAiOUT Input Hold Time
Standard
Unit
Min.
Max.
2000
ns
1000
ns
1000
ns
400
ns
400
ns
Table 21.92 Timer A Input (Two-phase Pulse Input in Event Counter Mode)
Symbol
Parameter
Standard
Unit
Min.
Max.
tc(TA)
TAiIN Input Cycle Time
800
ns
tsu(TAIN-TAOUT) TAiOUT Input Setup Time
200
ns
tsu(TAOUT-TAIN) TAiIN Input Setup Time
200
ns
Rev. 1.12 Mar.30, 2007 ^{page 416} of 458
REJ09B0101-0112