M16C29 Datasheet, PDF (417/499 Pages) Renesas Technology Corp – RENESAS MCU M16C FAMILY / M16C/Tiny SERIES

M16C/29 Group
21. Electrical Characteristics (T-version)
Table 21.47 Electrical Characteristics (2) (Note 1)
VCC = 5V
Symbol Parameter
Measurement Condition
Standard
Unit
Min. Typ. Max.
ICC
Power Supply Output pins are Mask ROM
f(BCLK) = 20 MHz,
Current
left open and
main clock, no division
(VCC=4.2 to 5.5V) other pins are
connected to VSS
On-chip oscillation, f2(ROC) selected,
f(BCLK) = 1 MHz
18 25 mA
2
mA
Flash memory f(BCLK) = 20 MHz,
main clock, no division
18 25 mA
On-chip oscillation, f2(ROC) selected,
f(BCLK) = 1 MHz
2
mA
Flash memory
program
f(BCLK) = 10 MHz, Vcc = 5.0 V
11
mA
Flash memory
erase
f(BCLK) = 10 MHz, Vcc = 5.0 V
11
mA
Mask ROM
f(BCLK) = 32 kHz,
In low-power consumption mode,
Program running on ROM⁽³⁾
25
µA
On-chip oscillation,
f2(ROC) selected, f(BCLK) = 1 MHz,
In wait mode
50
µA
Flash memory f(BCLK) = 32 kHz,
In low-power consumption mode,
Program running on RAM⁽³⁾
25
µA
f(BCLK) = 32 kHz,
450
µA
In low-power consumption mode,
Program running on flash memory⁽³⁾
On-chip oscillation,
f2(ROC) selected, f(BCLK) = 1 MHz,
In wait mode
50
µA
Mask ROM, f(BCLK) = 32 kHz, In wait mode⁽²⁾,
Flash memory Oscillation capacity high
8.5
µA
f(BCLK) = 32 kHz, In wait mode⁽²⁾,
Oscillation capacity low
3
µA
While clock stops, Topr = 25° C
0.8 3 µA
NOTES:
1. Referenced to VCC = 4.2 to 5.5 V, VSS = 0 V at Topr = -40 to 85 ° C, f(BCLK) = 20 MHz unless otherwise specified.
2. With one timer operates, using fC32.
3. This indicates the memory in which the program to be executed exists.
Rev. 1.12 Mar.30, 2007 ^{page 393} of 458
REJ09B0101-0112