MC68HC705JP7 Datasheet, PDF (210/242 Pages) Motorola, Inc – HCMOS Microcontroller Unit

Freescale Semiconductor, Inc.
Electrical Specifications
15.2 Introduction
This section contains the electrical and timing specifications.
15.3 Maximum Ratings
Maximum ratings are the extreme limits to which the MCU can be
exposed without permanently damaging it.
The MCU contains circuitry to protect the inputs against damage from
high static voltages; however, do not apply voltages higher than those
shown in the table below. Keep V_In and V_Out within the range
V_SS ≤(V_In or V_Out) ≤V_DD. Connect unused inputs to the appropriate
voltage level, either V_SS or V_DD.
Rating
Supply voltage
Bootloader/self-check mode
(IRQ/V_PP pin only)
Current drain per pin excluding V_DD and V_SS
Operating junction temperature
Storage temperature range
Symbol
V_DD
Value
–0.3 to +7.0
Unit
V
V_In
V_SS –0.3 to 17 V
I
25
mA
T_J
+150
°C
T_stg
–65 to +150 ° C
NOTE:
This device is not guaranteed to operate properly at the maximum
ratings. Refer to 15.8 DC Electrical Characteristics (5.0 Vdc) and 15.9
DC Electrical Characteristics (3.0 Vdc) for guaranteed operating
conditions.
Advance Information
210
MC68HC705JJ7 • MC68HC705JP7 — REV 4
Electrical Specifications
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA