MC68HC705JP7 Datasheet, PDF (156/242 Pages) Motorola, Inc – HCMOS Microcontroller Unit

Core Timer
Freescale Semiconductor, Inc.
Each count of the timer counter register takes eight oscillator cycles or
four cycles of the internal bus. A timer overflow function at the eighth
counter stage allows a timer interrupt every 2048 oscillator clock cycles
or every 1024 internal bus cycles.
10.5 COP Watchdog
Four counter stages at the end of the core timer make up the computer
operating properly (COP) watchdog which can be enabled by the
COPEN bit in the MOR. The COP watchdog is a software error detection
system that automatically times out and resets the MCU if the COP
watchdog is not cleared periodically by a program sequence. Writing a
logic 0 to COPC bit in the COPR register clears the COP watchdog and
prevents a COP reset.
Address: $1FF0
Bit 7
6
5
4
3
2
1
Read:
OPT
Write: EPMSEC
Reset:
Unaffected by reset
= Unimplemented
Figure 10-4. COP and Security Register (COPR)
Bit 0
COPC
EPMSEC — EPROM Security⁽¹⁾ Bit
The EPMSEC bit is a write-only security bit to protect the contents of
the user EPROM code stored in locations $0700–$1FFF.
OPT — Optional Features Bit
The OPT bit enables two additional features: direct drive by
comparator outputs to port A and voltage offset capability to sample
capacitor in analog subsystem.
1 = Optional features enabled
0 = Optional features disabled
1. No security feature is absolutely secure. However, Motorola’s strategy is to make reading or
copying the EPROM/OTPROM difficult for unauthorized users.
Advance Information
156
MC68HC705JJ7 • MC68HC705JP7 — REV 4
Core Timer
For More Information On This Product,
Go to: www.freescale.com
MOTOROLA