SDA55XX Datasheet, PDF (53/230 Pages) Infineon Technologies AG – Preliminary & Confidential

SDA 55xx
Preliminary & Confidential
Line Parameters
Slicer and Acquisition
Default after reset: 00_H
(MSB)
$&4/3
(LSB)
DINCR(15) DINCR(14) DINCR(13) DINCR(12) DINCR(11) DINCR(10) DINCR(9) DINCR(8)
DINCR(15..8):
Data PLL Frequency Select (High Byte)
Specifies the frequency of the D-PLL of slicer 1. This parameter is
used to configure the D-PLL output frequency according to the
service used.

9DI8SÃ2Ãs_GDWDÃÃ! ÃÃ""""HC“
s_GDWDÃbHC“d
6.9375
5.7273
5.0
1.006993
9DI8S
54559
45041
39321
7920
Default after reset: 00_H
(MSB)
$&4/3
(LSB)
DINCR(7) DINCR(6) DINCR(5) DINCR(4) DINCR(3) DINCR(2) DINCR(1) DINCR(0)
DINCR(7..0):
Data PLL Frequency Select (Low Byte)
(refer to ACQLP0)
Semiconductor Group
53
User’s Manual July 99