HD6417751RBP240V Datasheet, PDF (783/1226 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

16. Serial Communication Interface with FIFO (SCIF)
Bit 7—Receive Error (ER): Indicates that a framing error or parity error occurred during
reception.*
Note: * The ER flag is not affected and retains its previous state when the RE bit in SCSCR2 is
cleared to 0. When a receive error occurs, the receive data is still transferred to
SCFRDR2, and reception continues.
The FER and PER bits in SCFSR2 can be used to determine whether there is a receive
error in the data read from SCFRDR2.
Bit 7: ER
0
Description
No framing error or parity error occurred during reception
[Clearing conditions]
• Power-on reset or manual reset
• When 0 is written to ER after reading ER = 1
(Initial value)
1
A framing error or parity error occurred during reception
[Setting conditions]
• When the SCIF checks whether the stop bit at the end of the receive
data is 1 when reception ends, and the stop bit is 0*
• When, in reception, the number of 1-bits in the receive data plus the
parity bit does not match the parity setting (even or odd) specified by the
O/E bit in SCSMR2
Note: * In 2-stop-bit mode, only the first stop bit is checked for a value of 1; the second stop bit
is not checked.
Rev.4.00 Oct. 10, 2008 Page 683 of 1122
REJ09B0370-0400