PIC18CXX2_13 Datasheet, PDF (69/304 Pages) Microchip Technology – High Performance Microcontrollers with 10-bit A/D

PIC18CXX2
REGISTER 7-5:
PERIPHERAL INTERRUPT REQUEST (FLAG) REGISTER 2 (PIR2)
U-0
U-0
U-0
U-0
R/W-0 R/W-0 R/W-0 R/W-0
—
—
—
—
BCLIF LVDIF TMR3IF CCP2IF
bit 7
bit 0
bit 7-4
bit 3
bit 2
bit 1
bit 0
Unimplemented: Read as '0'
BCLIF: Bus Collision Interrupt Flag bit
1 = A bus collision occurred (must be cleared in software)
0 = No bus collision occurred
LVDIF: Low Voltage Detect Interrupt Flag bit
1 = A low voltage condition occurred (must be cleared in software)
0 = The device voltage is above the Low Voltage Detect trip point
TMR3IF: TMR3 Overflow Interrupt Flag bit
1 = TMR3 register overflowed (must be cleared in software)
0 = TMR3 register did not overflow
CCP2IF: CCPx Interrupt Flag bit
Capture mode:
1 = A TMR1 register capture occurred (must be cleared in software)
0 = No TMR1 register capture occurred
Compare mode:
1 = A TMR1 register compare match occurred (must be cleared in software)
0 = No TMR1 register compare match occurred
PWM mode:
Unused in this mode
Legend:
R = Readable bit
- n = Value at POR reset
W = Writable bit
’1’ = Bit is set
U = Unimplemented bit, read as ‘0’
’0’ = Bit is cleared x = Bit is unknown
 1999-2013 Microchip Technology Inc.
DS39026D-page 69