PIC18CXX2_13 Datasheet, PDF (243/304 Pages) Microchip Technology – High Performance Microcontrollers with 10-bit A/D

PIC18CXX2
TABLE 21-2: EPROM PROGRAMMING REQUIREMENTS
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +40°C
Param.
No.
Sym
Characteristic
Min
Max Units
Conditions
D110
D111
D112
D113
D114
VPP
VDDP
IPP
IDDP
TPROG
Internal Program Memory
Programming Specs (Note 1)
Voltage on MCLR/VPP pin
Supply voltage during
programming
Current into MCLR/VPP pin
Supply current during
programming
Programming pulse width
12.75
4.75
—
—
50
D115 TERASE EPROM erase time
Device operation  3V
60
Device operation  3V
30
13.25
5.25
V (Note 2)
V
50 mA
30 mA
1000
s Terminated via internal/external
interrupt or a RESET
— min.
— min.
Note 1: These specifications are for the programming of the on-chip program memory EPROM through the use of
the table write instructions. The complete programming specifications can be found in the
PIC18CXXX Programming Specifications (Literature Number DS39028).
2: The MCLR/VPP pin may be kept in this range at times other than programming, but is not recommended.
 1999-2013 Microchip Technology Inc.
DS39026D-page 243