MC68HC908JW32_09 Datasheet, PDF (117/232 Pages) Freescale Semiconductor, Inc – M68HC08 Microcontrollers

I/O Registers
Address: $000D
Bit 7
6
5
4
3
2
1
Bit 0
Read: Bit 7
6
5
4
3
2
1
Bit 0
Write:
Reset: 0
0
0
0
0
0
0
0
= Unimplemented
Figure 8-6. TIM Counter Registers Low (TCNTL)
8.9.3 TIM Counter Modulo Registers
The read/write TIM modulo registers contain the modulo value for the TIM counter. When the TIM counter
reaches the modulo value, the overflow flag (TOF) becomes set, and the TIM counter resumes counting
from $0000 at the next timer clock. Writing to the high byte (TMODH) inhibits the TOF bit and overflow
interrupts until the low byte (TMODL) is written. Reset sets the TIM counter modulo registers.
Address: $000E
Bit 7
6
5
4
3
2
1
Bit 0
Read:
Bit 15
14
13
12
11
10
Write:
9
Bit 8
Reset: 1
1
1
1
1
1
1
1
Figure 8-7. TIM Counter Modulo Register High (TMODH)
Address: $000F
Bit 7
6
5
4
3
2
1
Bit 0
Read:
Bit 7
6
5
4
3
2
1
Bit 0
Write:
Reset: 1
1
1
1
1
1
1
1
Figure 8-8. TIM Counter Modulo Register Low (TMODL)
NOTE
Reset the TIM counter before writing to the TIM counter modulo registers.
8.9.4 TIM Channel Status and Control Registers
Each of the TIM channel status and control registers:
• Flags input captures and output compares
• Enables input capture and output compare interrupts
• Selects input capture, output compare, or PWM operation
• Selects high, low, or toggling output on output compare
• Selects rising edge, falling edge, or any edge as the active input capture trigger
• Selects output toggling on TIM overflow
• Selects 0% and 100% PWM duty cycle
• Selects buffered or unbuffered output compare/PWM operation
MC68HC908JW32 Data Sheet, Rev. 6
Freescale Semiconductor
117