|
EP3C5E144C8N Datasheet, PDF (316/348 Pages) Altera Corporation – Ability to disable external JTAG port | |||
|
◁ |
2â2
Chapter 2: Cyclone III LS Device Data Sheet
Electrical Characteristics
Table 2â1. Cyclone III LS Devices Absolute Maximum Ratings (1) (Part 2 of 2)
Symbol
Parameter
Min
Max
Unit
VCCA
VCCD_PLL
VCCBAT (2)
Supply (analog) voltage for PLL regulator
Supply (digital) voltage for PLL
Battery back-up power supply for design
security volatile key register
â0.5
3.75
V
â0.5
1.8
V
â0.5
3.75
V
VI
DC input voltage
â0.5
3.95
V
IOUT
DC output current, per pin
â25
40
mA
VESDHBM
Electrostatic discharge voltage using the human
body model
â
±2000
V
VESDCDM
Electrostatic discharge voltage using the
charged device model
â
±500
V
TSTG
Storage temperature
â65
150
°C
TJ
Operating junction temperature
â40
100
°C
Note to Table 2â1:
(1) Supply voltage specifications apply to voltage readings taken at the device pins with respect to ground, not at the
power supply.
(2) VCCBAT is tied to Power-on reset (POR). If the VCCBAT is below 1.2 V, the device will not power up.
Maximum Allowed Overshoot or Undershoot Voltage
During transitions, input signals may overshoot to the voltage listed in Table 2â2 and
undershoot to â2.0 V for a magnitude of currents less than 100 mA and for periods
shorter than 20 ns.
Table 2â2 lists the maximum allowed input overshoot voltage and the duration of the
overshoot voltage as a percentage over the lifetime of the device. The maximum
allowed overshoot duration is specified as percentage of high-time over the lifetime of
the device.
Cyclone III Device Handbook
Volume 2
December 2011 Altera Corporation
|
▷ |