DS90UB964-Q1 Datasheet, PDF (95/116 Pages) Texas Instruments – DS90UB964-Q1 Quad FPD-Link III Deserializer Hub

www.ti.com
DS90UB964-Q1
SNLS500 – JULY 2016
Table 14. Digital Page 0 Indirect Registers (continued)
Indirect Addr
Page (hex)
0x42
Register Name
CSI0_TCK_TRAIL
0x43 CSI0_TCK_POST
0x44 CSI0_THS_PREP
0x45 CSI0_THS_ZERO
0x46 CSI0_THS_TRAIL
0x47 CSI0_THS_EXIT
Bit(s) Field
Type Default Description
7
MR_TCK_TRAIL_OV RW
0
Override CSI Tck-trail parameter
0: Tck-trail is automatically determined
1: Override Tck-trail with value in bits 6:0 of
this register
6:0 MR_TCK_TRAIL
R
0x0
Tck-trail value
RW
If bit 7 of this register is 0, this field is read-
only, indicating current automatically
determined value.
If bit 7 of this register is 1, this field is
read/write.
7
MR_TCK_POST_OV RW
0
Override CSI Tck-post parameter
0: Tck-post is automatically determined
1: Override Tck-post with value in bits 6:0 of
this register
6:0 MR_TCK_POST
R
0x0
Tck-post value
RW
If bit 7 of this register is 0, this field is read-
only, indicating current automatically
determined value.
If bit 7 of this register is 1, this field is
read/write.
7
MR_THS_PREP_OV RW
0
Override CSI Ths-prep parameter
0: Ths-prep is automatically determined
1: Override Ths-prep with value in bits 6:0 of
this register
6:0 MR_THS_PREP
R
0x0
Ths-prep value
RW
If bit 7 of this register is 0, this field is read-
only, indicating current automatically
determined value.
If bit 7 of this register is 1, this field is
read/write.
7
MR_THS_ZERO_OV RW
0
Override CSI Ths-zero parameter
0: Ths-zero is automatically determined
1: Override Ths-zero with value in bits 6:0 of
this register
6:0 MR_THS_ZERO
R
0x0
Ths-zero value
RW
If bit 7 of this register is 0, this field is read-
only, indicating current automatically
determined value.
If bit 7 of this register is 1, this field is
read/write.
7
MR_THS_TRAIL_OV RW
0
Override CSI Ths-trail parameter
0: Ths-trail is automatically determined
1: Override Ths-trail with value in bits 6:0 of
this register
6:0 MR_THS_TRAIL
R
0x0
Ths-trail value
RW
If bit 7 of this register is 0, this field is read-
only, indicating current automatically
determined value.
If bit 7 of this register is 1, this field is
read/write.
7
MR_THS_EXIT_OV RW
0
Override CSI Ths-exit parameter
0: Ths-exit is automatically determined
1: Override Ths-exit with value in bits 6:0 of
this register
6:0 MR_THS_EXIT
R
0x0
Ths-exit value
RW
If bit 7 of this register is 0, this field is read-
only, indicating current automatically
determined value.
If bit 7 of this register is 1, this field is
read/write.
Copyright © 2016, Texas Instruments Incorporated
Product Folder Links: DS90UB964-Q1
Submit Documentation Feedback
95