DS90UB964-Q1 Datasheet, PDF (92/116 Pages) Texas Instruments – DS90UB964-Q1 Quad FPD-Link III Deserializer Hub

DS90UB964-Q1
SNLS500 – JULY 2016
www.ti.com
Indirect Addr
Page (hex)
Block 0 0x00
0x01
Register Name
Reserved
PGEN_CTL
0x02 PGEN_CFG
0x03 PGEN_CSI_DI
0x04 PGEN_LINE_SIZE1
0x05 PGEN_LINE_SIZE0
0x06 PGEN_BAR_SIZE1
0x07 PGEN_BAR_SIZE0
0x08 PGEN_ACT_LPF1
0x09 PGEN_ACT_LPF0
0x0A PGEN_TOT_LPF1
0x0B PGEN_TOT_LPF0
Table 14. Digital Page 0 Indirect Registers
Bit(s) Field
Type Default Description
7:0 RESERVED
R
7:1 RESERVED
RW
0
PGEN_ENABLE
RW
7
PGEN_FIXED_EN RW
6
RESERVED
RW
5:4 NUM_CBARS
RW
3:0 BLOCK_SIZE
RW
7:6 PGEN_CSI_VC
RW
5:0 PGEN_CSI_DT
RW
7:0 PGEN_LINE_SIZE[15 RW
:8]
7:0 PGEN_LINE_SIZE[7: RW
0]
7:0 PGEN_BAR_SIZE[15 RW
:8]
7:0 PGEN_BAR_SIZE[7: RW
0]
7:0 PGEN_ACT_LPF[15: RW
8]
7:0 PGEN_ACT_LPF[7:0] RW
7:0 PGEN_TOT_LPF[15: RW
8]
7:0 PGEN_TOT_LPF[7:0] RW
0x0
0x0
0
0
0
0x3
0x3
0x0
0x24
0x07
0x80
0x0
0xF0
0x01
0xE0
0x02
0x0D
Reserved
Reserved
Pattern Generator Enable
1: Enable Pattern Generator
0: Disable Pattern Generator
Fixed Pattern Enable
Setting this bit enables Fixed Color Patterns.
0 : Send Color Bar Pattern
1 : Send Fixed Color Pattern
Reserved
Number of Color Bars
00 : 1 Color Bar
01 : 2 Color Bars
10 : 4 Color Bars
11 : 8 Color Bars
Block Size
For Fixed Color Patterns, this field controls
the size of the fixed color field in bytes.
Allowed values are 1 to 15.
CSI Virtual Channel Identifier
This field controls the value sent in the CSI
packet for the Virtual Channel Identifier
CSI Data Type
This field controls the value sent in the CSI
packet for the Data Type. The default value
(0x24) indicates RGB888.
Most significant byte of the Pattern Generator
line size. This is the active line length in
bytes. Default setting is for 1920 bytes for a
640 pixel line width.
Least significant byte of the Pattern
Generator line size. This is the active line
length in bytes. Default setting is for 1920
bytes for a 640 pixel line width.
Most significant byte of the Pattern Generator
color bar size. This is the active length in
bytes for the color bars. This value is used for
all except the last color bar. The last color bar
is determined by the remaining bytes as
defined by the PGEN_LINE_SIZE value.
Least significant byte of the Pattern
Generator color bar size. This is the active
length in bytes for the color bars. This value
is used for all except the last color bar. The
last color bar is determined by the remaining
bytes as defined by the PGEN_LINE_SIZE
value.
Active Lines Per Frame
Most significant byte of the number of active
lines per frame. Default setting is for 480
active lines per frame.
Active Lines Per Frame
Least significant byte of the number of active
lines per frame. Default setting is for 480
active lines per frame.
Total Lines Per Frame
Most significant byte of the number of total
lines per frame including vertical blanking
Total Lines Per Frame
Least significant byte of the number of total
lines per frame including vertical blanking
92
Submit Documentation Feedback
Product Folder Links: DS90UB964-Q1
Copyright © 2016, Texas Instruments Incorporated