DS90UB964-Q1 Datasheet, PDF (78/116 Pages) Texas Instruments – DS90UB964-Q1 Quad FPD-Link III Deserializer Hub

DS90UB964-Q1
SNLS500 – JULY 2016
www.ti.com
Register Maps (continued)
Page
RX
Addr
(hex)
0x65
Register Name
SlaveAlias[0]
RX 0x66 SlaveAlias[1]
RX 0x67 SlaveAlias[2]
RX 0x68 SlaveAlias[3]
RX 0x69 SlaveAlias[4]
Table 12. Serial Control Bus Registers (continued)
Bit(s) Field
Type Default Description
7:1 SLAVE ALIAS ID0 RW
0x0
7-bit Remote Slave Device Alias ID 0
Configures the decoder for detecting
transactions designated for an I2C Slave
device attached to the remote Serializer. The
transaction is remapped to the address
specified in the Slave ID0 register. A value of 0
in this field disables access to the remote I2C
Slave.
0
SLAVE AUTO ACK 0 RW
0
Automatically Acknowledge all I2C writes to
the remote Slave 0 independent of the forward
channel lock state or status of the remote
Serializer Acknowledge1: Enable0: Disable
7:1 SLAVE ALIAS ID1 RW
0x0
7-bit Remote Slave Device Alias ID 1
Configures the decoder for detecting
transactions designated for an I2C Slave
device attached to the remote Serializer. The
transaction is remapped to the address
specified in the Slave ID1 register. A value of 0
in this field disables access to the remote I2C
Slave.
0
SLAVE AUTO ACK 1 RW
0
Automatically Acknowledge all I2C writes to
the remote Slave 1 independent of the forward
channel lock state or status of the remote
Serializer Acknowledge1: Enable0: Disable
7:1 SLAVE ALIAS ID2 RW
0x0
7-bit Remote Slave Device Alias ID 2
Configures the decoder for detecting
transactions designated for an I2C Slave
device attached to the remote Serializer. The
transaction is remapped to the address
specified in the Slave ID2 register. A value of 0
in this field disables access to the remote I2C
Slave.
0
SLAVE AUTO ACK 2 RW
0
Automatically Acknowledge all I2C writes to
the remote Slave 2 independent of the forward
channel lock state or status of the remote
Serializer Acknowledge
1: Enable
0: Disable
7:1 SLAVE ALIAS ID3 RW
0x0
7-bit Remote Slave Device Alias ID 3
Configures the decoder for detecting
transactions designated for an I2C Slave
device attached to the remote Serializer. The
transaction is remapped to the address
specified in the Slave ID3 register. A value of 0
in this field disables access to the remote I2C
Slave.
0
SLAVE AUTO ACK 3 RW
0
Automatically Acknowledge all I2C writes to
the remote Slave 3 independent of the forward
channel lock state or status of the remote
Serializer Acknowledge
1: Enable
0: Disable
7:1 SLAVE ALIAS ID4 RW
0x0
7-bit Remote Slave Device Alias ID 4
Configures the decoder for detecting
transactions designated for an I2C Slave
device attached to the remote Serializer. The
transaction is remapped to the address
specified in the Slave ID4 register. A value of 0
in this field disables access to the remote I2C
Slave.
78
Submit Documentation Feedback
Product Folder Links: DS90UB964-Q1
Copyright © 2016, Texas Instruments Incorporated