DS90UB964-Q1 Datasheet, PDF (77/116 Pages) Texas Instruments – DS90UB964-Q1 Quad FPD-Link III Deserializer Hub

www.ti.com
DS90UB964-Q1
SNLS500 – JULY 2016
Register Maps (continued)
Page
RX
Addr
(hex)
0x5F
Register Name
SlaveID[2]
RX 0x60 SlaveID[3]
RX 0x61 SlaveID[4]
RX 0x62 SlaveID[5]
RX 0x63 SlaveID[6]
RX 0x64 SlaveID[7]
Table 12. Serial Control Bus Registers (continued)
Bit(s) Field
Type Default Description
7:1 SLAVE ID2
0
RESERVED
7:1 SLAVE ID3
0
RESERVED
7:1 SLAVE ID4
0
RESERVED
7:1 SLAVE ID5
0
RESERVED
7:1 SLAVE ID6
0
RESERVED
7:1 SLAVE ID7
0
RESERVED
RW
0x0
7-bit Remote Slave Device ID 2
Configures the physical I2C address of the
remote I2C Slave device attached to the
remote Serializer. If an I2C transaction is
addressed to the Slave Alias ID2, the
transaction is remapped to this address before
passing the transaction across the Bi-
directional Control Channel to the Serializer.
R
0
Reserved.
RW
0x0
7-bit Remote Slave Device ID 3
Configures the physical I2C address of the
remote I2C Slave device attached to the
remote Serializer. If an I2C transaction is
addressed to the Slave Alias ID3, the
transaction is remapped to this address before
passing the transaction across the Bi-
directional Control Channel to the Serializer.
R
0
Reserved.
RW
0x0
7-bit Remote Slave Device ID 4
Configures the physical I2C address of the
remote I2C Slave device attached to the
remote Serializer. If an I2C transaction is
addressed to the Slave Alias ID4, the
transaction is remapped to this address before
passing the transaction across the Bi-
directional Control Channel to the Serializer.
R
0
Reserved.
RW
0x0
7-bit Remote Slave Device ID 5
Configures the physical I2C address of the
remote I2C Slave device attached to the
remote Serializer. If an I2C transaction is
addressed to the Slave Alias ID5, the
transaction is remapped to this address before
passing the transaction across the Bi-
directional Control Channel to the Serializer.
R
0
Reserved.
RW
0x0
7-bit Remote Slave Device ID 6
Configures the physical I2C address of the
remote I2C Slave device attached to the
remote Serializer. If an I2C transaction is
addressed to the Slave Alias ID6, the
transaction is remapped to this address before
passing the transaction across the Bi-
directional Control Channel to the Serializer.
R
0
Reserved.
RW
0x0
7-bit Remote Slave Device ID 7
Configures the physical I2C address of the
remote I2C Slave device attached to the
remote Serializer. If an I2C transaction is
addressed to the Slave Alias ID7, the
transaction is remapped to this address before
passing the transaction across the Bi-
directional Control Channel to the Serializer.
R
0
Reserved.
Copyright © 2016, Texas Instruments Incorporated
Product Folder Links: DS90UB964-Q1
Submit Documentation Feedback
77