HD64F3687HV Datasheet, PDF (224/538 Pages) Renesas Technology Corp – Renesas 16-Bit Single-Chip Microcomputer H8 Family/H8/300H Tiny Series

Section 13 Timer Z
13.3.8 General Registers A, B, C, and D (GRA, GRB, GRC, and GRD)
GR are 16-bit registers. Timer Z has eight general registers (GR), four for each channel. The GR
registers are dual function 16-bit readable/writable registers, functioning as either output compare
or input capture registers. Functions can be switched by TIORA and TIORC.
The values in GR and TCNT are constantly compared with each other when the GR registers are
used as output compare registers. When the both values match, the IMFA to IMFD flags in TSR
are set to 1. Compare match outputs can be selected by TIORA and TIORC.
When the GR registers are used as input capture registers, the TCNT value is stored after detecting
external signals. At this point, IMFA to IMFD flags in the corresponding TSR are set to 1.
Detection edges for input capture signals can be selected by TIORA and TIORC.
When PWM mode, complementary PWM mode, or reset synchronous PWM mode is selected, the
values in TIORA and TIORC are ignored. Upon reset, the GR registers are set as output compare
registers (no output) and initialized to H'FFFF. The GR registers cannot be accessed in 8-bit units;
they must always be accessed as a 16-bit unit.
Rev.5.00 Nov. 02, 2005 Page 190 of 500
REJ09B0027-0500