|
SAA7118 Datasheet, PDF (41/169 Pages) NXP Semiconductors – Multistandard video decoder with adaptive comb filter and component video input | |||
|
◁ |
Philips Semiconductors
Multistandard video decoder with adaptive
comb ï¬lter and component video input
Preliminary speciï¬cation
SAA7118
8.2.3 COMPONENT VIDEO BCS CONTROL
The resulting Y and CB-CR signals are fed to the Component BCS (CBCS) block, which contains the following functions:
⢠Chrominance saturation control by CSAT7 to CSAT0
⢠Luminance contrast and brightness control by CCON7 to CCON0 and CBRI7 to CBRI0
⢠Limiting Y-CB-CR or CVBS to the values 1 (minimum) and 254 (maximum) to fulfil âITU Recommendation 601/656â.
handbook, full pagewi+d2th55
+235
white
+255
+240
+212
blue 100%
blue 75%
+255
+240
+212
red 100%
red 75%
+128 LUMINANCE 100%
+16
black
0
a. Y output range.
+128
colourless
CB- COMPONENT
+128
colourless
CR- COMPONENT
+44
yellow 75%
+44
+16
yellow 100%
+16
0
0
cyan 75%
cyan 100%
MHB730
b. CB output range.
c. CR output range.
âITU Recommendation 601/656â digital levels with default CBCS (decoder) settings CCON[7:0] = 44H, CBRI[7:0] = 80H and CSAT[7:0] = 40H.
Equations for modification to the Y-CB-CR levels via CBCS control I2C-bus bytes CBRI, CCON and CSAT.
Luminance: YOUT = Int C-----C-6---O8-----N--- Ã (Y â 128) + CBRI
Chrominance: (CBCR)OUT = Int C-----S6---4-A----T-- Ã (CB, CR â 128) + 128
It should be noted that the resulting levels are limited to 1 to 254 in accordance with âITU Recommendation 601/656â.
Fig.27 Components Y-CB-CR range.
2001 May 30
41
|
▷ |