|
SAA7118 Datasheet, PDF (4/169 Pages) NXP Semiconductors – Multistandard video decoder with adaptive comb filter and component video input | |||
|
◁ |
Philips Semiconductors
Multistandard video decoder with adaptive
comb ï¬lter and component video input
Preliminary speciï¬cation
SAA7118
1.6 Audio clock generation
⢠Generation of a field-locked audio master clock to
support a constant number of audio clocks per video
field
⢠Generation of an audio serial and left/right (channel)
clock signal.
1.7 Digital I/O interfaces
⢠Real-time signal port (R port), inclusive continuous
line-locked reference clock and real-time status
information supporting RTC level 3.1 (refer to document
âRTC Functional Specificationâ for details)
⢠Bidirectional expansion port (X-port) with half duplex
functionality (D1), 8-bit Y-CB-CR
â Output from decoder part, real-time and unscaled
â Input to scaler part, e.g. video from MPEG decoder
(extension to 16-bit possible)
⢠Video image port (I-port) configurable for 8-bit data
(extension to 16-bit possible) in master mode (own
clock), or slave mode (external clock), with auxiliary
timing and handshake signals
⢠Discontinuous data streams supported
⢠32-word à 4-byte FIFO register for video output data
⢠28-word à 4-byte FIFO register for decoded VBI-data
output
⢠Scaled 4 : 2 : 2, 4 : 1 : 1, 4 : 2 : 0, 4 : 1 : 0 Y-CB-CR
output
⢠Scaled 8-bit luminance only and raw CVBS data output
⢠Sliced, decoded VBI-data output.
1.8 Miscellaneous
⢠Power-on control
⢠5 V tolerant digital inputs and I/O ports
⢠Software controlled power saving standby modes
supported
⢠Programming via serial I2C-bus, full read back ability by
an external controller, bit rate up to 400 kbits/s
⢠Boundary scan test circuit complies with the âIEEE Std.
1149.b1 - 1994â.
2 APPLICATIONS
⢠PC-video capture and editing
⢠Personal video recorders (time shifting)
⢠Cable, terrestrial, and satellite set-top boxes
⢠Internet terminals
⢠Flat-panel monitors
⢠DVD-recordable players
⢠AV-ready hard-disk drivers
⢠Digital televisions/scan conversion
⢠Video surveillance/security
⢠Video editing/post production
⢠Video phones
⢠Video projectors
⢠Digital VCRs.
3 GENERAL DESCRIPTION
The SAA7118 is a video capture device for applications at
the image port of VGA controllers.
Philips X-VIP is a new multistandard comb filter video
decoder chip with additional component processing,
providing high quality, optionally scaled, video.
The SAA7118 is a combination of a four-channel analog
preprocessing circuit including source selection,
anti-aliasing filter and ADC with succeeding decimation
filters from 27 to 13.5 MHz data rate. Each preprocessing
channel comes with an automatic clamp and gain control.
The SAA7118 combines a Clock Generation Circuit
(CGC), a digital multistandard decoder containing
two-dimensional chrominance/luminance separation by an
adaptive comb filter and a high performance scaler,
including variable horizontal and vertical up and
downscaling and a brightness, contrast and saturation
control circuit.
2001 May 30
4
|
▷ |