F81866A Datasheet, PDF (50/210 Pages) Feature Integration Technology Inc. – 6 UARTs Super IO With 128 Bytes FIFO and Power

I2C_DATA5
F81866A
This is the 15^th byte of the block read protocol.
R/W 5VSB 8’h00 This byte is also used as the 6th byte of block write protocol.
To access this byte, MCH_BANK_SEL should be set to “1”.
TSI, I2C Temperature 5 – Index E6h
Bit
Name
R/W Reset Default
Description
TSI_TEMP5
R 5VSB
This is the high byte of Intel temperature interface DIMM1 reading. The
- range is 0~255^ºC.
To access this byte, MCH_BANK_SEL should be set to “0”.
7-0
This is the 16^th byte of the block read protocol.
I2C_DATA6
R/W 5VSB 8’h00 This byte is also used as the 7th byte of block write protocol.
To access this byte, MCH_BANK_SEL should be set to “1”.
TSI, I2C Temperature 6 – Index E7h
Bit
Name
R/W Reset Default
Description
TSI_TEMP6
R 5VSB
This is the high byte of Intel temperature interface DIMM2 reading. The
- range is 0~255^ºC.
To access this byte, MCH_BANK_SEL should be set to “0”.
7-0
This is the 17^th byte of the block read protocol.
I2C_DATA7
R/W 5VSB 8’h00 This byte is also used as the 8th byte of block write protocol.
To access this byte, MCH_BANK_SEL should be set to “1”.
TSI, I2C Temperature 7 – Index E8h
Bit
Name
R/W Reset Default
Description
TSI_TEMP7
R 5VSB
This is the high byte of Intel temperature interface DIMM3 reading. The
- range is 0~255^ºC. The above 9 bytes could also be used as the read
data of block read protocol if the TSI is disable or pending.
7-0
This is the 18^th byte of the block read protocol.
I2C_DATA8
R/W 5VSB 8’h00 This byte is also used as the 9th byte of block write protocol.
To access this byte, MCH_BANK_SEL should be set to “1”.
I2C Data Buffer 9 – Index E9h
Bit
Name
R/W Reset Default
Description
This is the 18^th byte of the block read protocol.
7-0
I2C_DATA9
R/W 5VSB FFh This byte is also used as the 9th byte of block write protocol.
To access this byte, MCH_BANK_SEL should be set to “1”.
50
Jan, 2012
V0. 12P