F81866A Datasheet, PDF (20/210 Pages) Feature Integration Technology Inc. – 6 UARTs Super IO With 128 Bytes FIFO and Power

F81866A
UART Data Terminal Ready. An active low signal
DTR5#
O₁₂
informs the modem or data set that controller is
ready to communicate.
GPIO64
I/OOD_{12st, 5v}
General Purpose IO.
DSKCHG#
21
IN_st,5v
3VCC
Diskette change. This signal is active low at power
on and whenever the diskette is removed.
Data Set Ready. An active low signal indicates the
DSR5#
IN_st,5v
modem or data set is ready to establish a
communication link and transfer data to the UART.
5.5 Parallel Port (LPT Port), & GPIO
Pin
Pin Name
Type
PWR
Description
FANIN3
IN_st,5v
Fan 3 tachometer input.
An active high input on this pin indicates that the
102
SLCT
IN_st,5v
3VCC printer is selected. Refer to the description of the
parallel port for definition of this pin in ECP and EPP
mode.
GPIO70
I/OOD_{12st, 5v}
General purpose IO.
An active high input on this pin indicates that the
PE
IN_st,5v
printer has detected the end of the paper. Refer to the
description of the parallel port for the definition of this
pin in ECP and EPP mode.
103
FANCTL3
OOD_12,5v
AOUT
3VCC ^{Fan 3 control output. This pin provides PWM}
duty-cycle output or a DAC voltage output.
Power on Strapping pin:
PWM _DAC3
IN_st,5v
1: PWM mode.
0: Default is DAC mode for FANCTL3 (internal pull
down 100k Ω ).
GPIO71
I/OOD_{12st, 5v}
General purpose IO.
An active high input indicates that the printer is not
104
BUSY
IN_st,5v
3VCC ready to receive data. Refer to the description of the
parallel port for definition of this pin in ECP and EPP
mode.
GPIO72
I/OOD_{12st, 5v}
General purpose IO.
An active low input on this pin indicates that the
105
ACK#
IN_st,5v
3VCC printer has received data and is ready to accept more
data. Refer to the description of the parallel port for
the definition of this pin in ECP and EPP mode.
GPIO73
I/OOD_{12st, 5v}
General purpose IO.
Output line for detection of printer selection. Refer to
106
3VCC
SLIN#
I/OOD_12st,5v
the description of the parallel port for the definition of
this pin in ECP and EPP mode.
GPIO74
I/OOD_{12st, 5v}
General purpose IO.
107
3VCC Output line for the printer initialization. Refer to the
INIT#
I/OOD_12st,5v
description of the parallel port for the definition of this
20
Jan, 2012
V0. 12P