Z8F082ASH020SC Datasheet, PDF (165/244 Pages) Zilog, Inc. – Z8 Encore XP-R F08xA Series with eXtended Peripherals

Z8 Encore! XP^® F08xA Series
Product Specification
147
Table 95. ADC Calibration Data Location (Continued)
Info Page
Address
1A
1B
Memory
Address
FE1A
FE1B
Compensation
Usage
ADC Mode
Gain High Byte Differential 1x Buffered
Gain Low Byte Differential 1x Buffered
Reference Type
External 2.0V
External 2.0V
Watchdog Timer Calibration Bits
Table 96. Watchdog Calibration High Byte at 007EH (WDTCALH)
BITS
7
6
5
4
3
2
1
0
FIELD
WDTCALH
RESET
U
U
U
U
U
U
U
U
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
ADDR
Information Page Memory 007EH
Note: U = Unchanged by Reset. R/W = Read/Write.
WDTCALH—Watchdog Timer Calibration High Byte
The WDTCALH and WDTCALL bytes, when loaded into the watchdog timer reload reg-
isters result in a one second timeout at room temperature and 3.3V supply voltage. To use
the Watch-Dog Timer calibration, user code must load WDTU with 0x00, WDTH with
WDTCALH and WDTL with WDTCALL.
Table 97. Watchdog Calibration Low Byte at 007FH (WDTCALL)
BITS
7
6
5
4
3
2
1
0
FIELD
WDTCALL
RESET
U
U
U
U
U
U
U
U
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
ADDR
Information Page Memory 007FH
Note: U = Unchanged by Reset. R/W = Read/Write.
WDTCALL—Watchdog Timer Calibration Low Byte
The WDTCALH and WDTCALL bytes, when loaded into the watchdog timer reload reg-
isters result in a one second timeout at room temperature and 3.3V supply voltage. To use
the watchdog timer calibration, user code must load WDTU with 0x00, WDTH with
WDTCALH and WDTL with WDTCALL.
PS024705-0405
PRELIMINARY
Flash Option Bits