W83L517D Datasheet, PDF (93/138 Pages) Winbond – LPC SUPER I/O

Bit 3:
TXINV - Transmitting Signal Invert
A write to 1 will Invert the transmitting signal.
Bit 2~0: Reserved, write 0.
W83L517D
Version 0.6
6. PARALLEL PORT
6.1 Printer Interface Logic
The parallel port of the W83L517D makes possible the attachment of various devices that accept eight
bits of parallel data at standard TTL level. The W83L517D supports an IBM XT/AT compatible parallel
port (SPP), bi-directional parallel port (BPP), Enhanced Parallel Port (EPP), Extended Capabilities
Parallel Port (ECP), Extension FDD mode (EXTFDD), Extension 2FDD mode (EXT2FDD) on the parallel
port. Refer to the configuration registers for more information on disabling, power-down, and on
selecting the mode of operation. Table 6-1 shows the pin definitions for different modes of the parallel
port.
TABLE 6-1-1 PARALLEL PORT CONNECTOR AND PIN DEFINITIONS
HOST
CONNECTOR
1
2-9
10
11
12
13
14
15
16
17
Pin Number
of W83627HF
36
31-26, 24-23
22
21
19
18
35
34
33
32
PIN
ATTRIBUTE
O
I/O
I
I
I
I
O
I
O
O
SPP
nSTB
PD<0:7>
nACK
BUSY
PE
SLCT
nAFD
nERR
nINIT
nSLIN
EPP
nWrite
PD<0:7>
Intr
nWait
PE
Select
nDStrb
nError
nInit
nAStrb
ECP
nSTB, HostClk²
PD<0:7>
nACK, PeriphClk²
BUSY, PeriphAck²
PEerror, nAckReverse²
SLCT, Xflag²
nAFD, HostAck²
nFault¹, nPeriphRequest²
nINIT¹, nReverseRqst²
nSLIN¹ , ECPMode²
Notes:
n<name > : Active Low
1. Compatible Mode
2. High Speed Mode
3. For more information, refer to the IEEE 1284 standard.
86
Publication Release Date: Apr. 2000
Revision 0.60