LM3S5G31 Datasheet, PDF (696/1223 Pages) Texas Instruments – Stellaris LM3S5G31 Microcontroller

Analog-to-Digital Converter (ADC)
Bit/Field
1
0
Name
DCINT1
DCINT0
Type
R/W
R/W
Reset
0
0
Description
Digital Comparator Interrupt 1
Value Description
1 Resets the Digital Comparator 1 interrupt unit to its initial
conditions.
0 No effect.
When the interrupt has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the interrupt, it is
important to reset the digital comparator to initial conditions when starting
a new sequence so that stale data is not used.
Digital Comparator Interrupt 0
Value Description
1 Resets the Digital Comparator 0 interrupt unit to its initial
conditions.
0 No effect.
When the interrupt has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the interrupt, it is
important to reset the digital comparator to initial conditions when starting
a new sequence so that stale data is not used.
696
July 03, 2014
Texas Instruments-Production Data