LM3S5G31 Datasheet, PDF (1167/1223 Pages) Texas Instruments – Stellaris LM3S5G31 Microcontroller

Stellaris^® LM3S5G31 Microcontroller
Table 25-34. Nominal Power Consumption
Parameter Parameter Name
Conditions
I_{DD_RUN} Run mode 1 (Flash loop)
V_DD = 3.3 V
Code= while(1){} executed out of Flash
Peripherals = All ON
System Clock = 80 MHz (with PLL)
Temp = 25°C
I_{DD_SLEEP} Sleep mode
V_DD = 3.3 V
Peripherals = All clock gated
System Clock = 80 MHz (with PLL)
Temp = 25°C
I_{DD_DEEPSLEEP} Deep-sleep mode
Peripherals = All OFF
System Clock = IOSC30KHZ/64
Temp = 25°C
I_{HIB_NORTC}
Hibernate mode (external wake,
RTC disabled, I/O not powered^a)
V_BAT = 3.0 V
V_DD = 0 V
V_DDA = 0 V
Peripherals = All OFF
System Clock = OFF
Hibernate Module = 0 kHz
I_{HIB_RTC}
Hibernate mode (RTC enabled,
I/O not powered^a)
V_BAT = 3.0 V
V_DD = 0 V
V_DDA = 0 V
Peripherals = All OFF
System Clock = OFF
Hibernate Module = 32 kHz
a. The VDD3ON mode must be disabled for the I/O ring to be unpowered.
Nom Unit
90
mA
20
mA
550
µA
30
µA
44
µA
25.19.2
Maximum Current Consumption
The current measurements specified in the table that follows are maximum values under the following
conditions:
■ V_DD = 3.6 V
■ V_DDC = 1.3 V
■ V_BAT = 3.25 V
■ V_DDA = 3.6 V
■ Temperature = 25°C
■ Clock source (MOSC) = 16.348-MHz crystal oscillator
July 03, 2014
Texas Instruments-Production Data
1167