M16C28 Datasheet, PDF (163/423 Pages) Renesas Technology Corp – 16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY / M16C/Tiny SERIES

M16C/28 Group (M16C/28, M16C/28B)
13. Timer S
Function Select Register
b7 b6 b5 b4 b3 b2 b1 b0
Symbol
G1FS
Address
032716
Bit
Symbol
FSC0
FSC1
FSC2
FSC3
FSC4
FSC5
FSC6
FSC7
Bit Name
Channel 0 Time Measure-
ment/Waveform Generating
Function Select Bit
Channel 1 Time Measure-
ment/Waveform Generating
Function Select Bit
Channel 2 Time Measure-
ment/Waveform Generating
Function Select Bit
Channel 3 Time Measure-
ment/Waveform Generating
Function Select Bit
Channel 4 Time Measure-
ment/Waveform Generating
Function Select Bit
Channel 5 Time Measure-
ment/Waveform Generating
Function Select Bit
Channel 6 Time Measure-
ment/Waveform Generating
Function Select Bit
Channel 7 Time Measure-
ment/Waveform Generating
Function Select Bit
After Reset
0016
Function
RW
0 : Select the waveform generating _RW
function
1 : Select the time measurement
function
RW
RW
RW
RW
RW
RW
RW
Function Enable Register⁽¹⁾
b7 b6 b5 b4 b3 b2 b1 b0
Symbol
G1FE
Address
032616
After Reset
0016
Bit
Symbol
Bit Name
IFE0 Channel 0 Function Enable Bit
IFE1 Channel 1 Function Enable Bit
IFE2 Channel 2 Function Enable Bit
IFE3 Channel 3 Function Enable Bit
IFE4
IFE5
IFE6
Channel 4 Function Enable Bit
Channel 5 Function Enable Bit
Channel 6 Function Enable Bit
IFE7 Channel 7 Function Enable Bit
Function
RW
0 : Disable function s for channel j ^{(2) RW}
1 : Enable functions for channel j
RW
(j=0 to 7)
RW
RW
RW
RW
RW
RW
NOTES:
1. The G1FE register reflects the base timer value, synchronizing with the count source fBT1 cycles.
2. When functions for the channel j are disabled, each pin functions as an I/O port.
Figure 13.8 G1FS and G1FE Registers
Rev. 2.00 Jan. 31, 2007 ^{page 143} of 385
REJ09B0047-0200