English
Language : 

MC9S08RG60 Datasheet, PDF (27/232 Pages) Motorola, Inc – Microcontrollers
SoC Guide — MC9S08RG60/D Rev 1.10
Table 2-2 Signal Properties (Continued)
Pin
Name
Dir(1)
High
Current Pin
Pullup(2)
Comments
PTD6/TPM1CH0 I/O
N
PTE0
I/O
N
PTE1
I/O
N
PTE2
I/O
N
PTE3
I/O
N
PTE4
I/O
N
PTE5
I/O
N
PTE6
I/O
N
PTE7
I/O
N
SWC
SWC
SWC
SWC
SWC
SWC
SWC
SWC
SWC
Available only in 44-LQFP package
Available only in 44-LQFP package
Available only in 44-LQFP package
Available only in 44-LQFP package
Available only in 44-LQFP package
Available only in 44-LQFP package
Available only in 44-LQFP package
Available only in 44-LQFP package
NOTES:
1. Unless otherwise indicated, all digital inputs have input hysteresis.
2. SWC is software-controlled pullup resistor, the register is associated with the respective port.
3. When these pins are configured as RESET or BKGD/MS pullup device is enabled.
4. When configured for the IRQ function, this pin will have a pullup device enabled when the IRQ is set for falling edge
detection and a pulldown device enabled when the IRQ is set for rising edge detection.
Freescale Semiconductor
MC9S08RC/RD/RE/RG
27