Z8F0830HH020SG Datasheet, PDF (24/257 Pages) Zilog, Inc. – High-Performance 8-Bit Microcontrollers

Z8 Encore!^® F0830 Series
Product Specification
6
Reset Controller
The Z8 Encore! F0830 Series products are reset using any one of the following: the
RESET pin, Power-On Reset, Watchdog Timer (WDT) time-out, STOP Mode exit or Volt-
age Brown-Out (VBO) warning signal. The RESET pin is bidirectional; i.e., it functions as
a reset source as well as a reset indicator.
On-Chip Debugger
The Z8 Encore! F0830 Series products feature an integrated On-Chip Debugger (OCD).
The OCD provides a rich set of debugging capabilities, such as reading and writing regis-
ters, programming Flash memory, setting breakpoints and executing code. The OCD uses
one single-pin interface for communication with an external host.
Acronyms and Expansions
This document references a number of acronyms; each is expanded in Table 2 for the
reader’s understanding.
Table 2. Acronyms and Expansions
Acronyms
ADC
NVDS
WDT
GPIO
OCD
POR
VBO
IPO
PDIP
SOIC
SSOP
QFN
IRQ
ISR
MSB
LSB
PWM
SAR
Expansions
Analog-to-Digital Converter
Nonvolatile Data Storage
Watchdog Timer
General-Purpose Input/Output
On-Chip Debugger
Power-On Reset
Voltage Brown-Out
Internal Precision Oscillator
Plastic Dual Inline Package
Small Outline Integrated Circuit
Small Shrink Outline Package
Quad Flat No Lead
Interrupt request
Interrupt service routine
Most significant byte
Least significant byte
Pulse Width Modulation
Successive Approximation Regis-
PS025113-1212
Acronyms and Expansions