 English |
|
|
|
|
|
|
|
| Z8F0830HH020SG Datasheet, PDF (177/257 Pages) Zilog, Inc. – High-Performance 8-Bit Microcontrollers | |||
| |||
| ◁ |
Z8 Encore!® F0830 Series
Product Specification
159
Oscillator Operation with an External RC Network
Figure 26 displays a recommended configuration for connection with an external resistor-
capacitor (RC) network.
VDD
R
XIN
C
Figure 26. Connecting the On-Chip Oscillator to an External RC Network
An external resistance value of 45 k⦠is recommended for oscillator operation with an
external RC network. The minimum resistance value to ensure operation is 40 kâ¦ï®ï The
typical oscillator frequency can be estimated from the values of the resistor (R in kâ¦) and
capacitor (C in pF) elements using the following equation:
Oscillator Frequency (kHz) = ï¨---0---.-4-----ï´-----R----1-ï´---ï´--C-1---0-ï©--6-+-----ï¨--4-----ï´-----C----ï©
Figure 27 displays the typical (3.3 V and 25°C) oscillator frequency as a function of the
capacitor (C in pF) employed in the RC network assuming a 45 k⦠external resistor. For
very small values of C, the parasitic capacitance of the oscillator XIN pin and the printed
circuit board should be included in the estimation of the oscillator frequency.
It is possible to operate the RC oscillator using only the parasitic capacitance of the pack-
age and printed circuit board. To minimize sensitivity to external parasitics, external
capacitance values in excess of 20 pF are recommended.
PS025113-1212
Oscillator Operation with an External RC Network
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese