Z8F6421PM020SC Datasheet, PDF (221/299 Pages) Zilog, Inc. – High Performance 8-Bit Microcontrollers Z8 Encore-R 64K Series

Z8 Encore!^® 64K Series
Product Specification
201
programming operation to occur. If the Flash Controller is not unlocked, the data is
discarded. If the device is not in DEBUG mode or if the Read Protect Option Bit is
enabled, the data is discarded.
DBG ← 0AH
DBG ← Program Memory Address[15:8]
DBG ← Program Memory Address[7:0]
DBG ← Size[15:8]
DBG ← Size[7:0]
DBG ← 1-65536 data bytes
• Read Program Memory (0BH)—The Read Program Memory command reads data
from Program Memory. This command is equivalent to the LDC and LDCI
instructions. Data can be read 1-65536 bytes at a time (65536 bytes can be read by
setting size to zero). If the device is not in DEBUG mode or if the Read Protect Option
Bit is enabled, this command returns FFH for the data.
DBG ← 0BH
DBG ← Program Memory Address[15:8]
DBG ← Program Memory Address[7:0]
DBG ← Size[15:8]
DBG ← Size[7:0]
DBG → 1-65536 data bytes
• Write Data Memory (0CH)—The Write Data Memory command writes data to Data
Memory. This command is equivalent to the LDE and LDEI instructions. Data can be
written 1-65536 bytes at a time (65536 bytes can be written by setting size to zero). If
the device is not in DEBUG mode or if the Read Protect Option Bit is enabled, the
data is discarded.
DBG ← 0CH
DBG ← Data Memory Address[15:8]
DBG ← Data Memory Address[7:0]
DBG ← Size[15:8]
DBG ← Size[7:0]
DBG ← 1-65536 data bytes
• Read Data Memory (0DH)—The Read Data Memory command reads from Data
Memory. This command is equivalent to the LDE and LDEI instructions. Data can be
read 1-65536 bytes at a time (65536 bytes can be read by setting size to zero). If the
device is not in DEBUG mode, this command returns FFH for the data.
DBG ← 0DH
DBG ← Data Memory Address[15:8]
DBG ← Data Memory Address[7:0]
DBG ← Size[15:8]
DBG ← Size[7:0]
DBG → 1-65536 data bytes
• Read Program Memory CRC (0EH)—The Read Program Memory CRC command
computes and returns the CRC (cyclic redundancy check) of Program Memory using
PS019915-1005
On-Chip Debugger