Z8F6421PM020SC Datasheet, PDF (196/299 Pages) Zilog, Inc. – High Performance 8-Bit Microcontrollers Z8 Encore-R 64K Series

Z8 Encore!^® 64K Series
Product Specification
176
0100 = ANA4
0101 = ANA5
0110 = ANA6
0111 = ANA7
1000 = ANA8
1001 = ANA9
1010 = ANA10
1011 = ANA11
11XX = Reserved.
ADC Data High Byte Register
The ADC Data High Byte register (Table 86) contains the upper eight bits of the 10-bit
ADC output. During a single-shot conversion, this value is invalid. Access to the ADC
Data High Byte register is read-only. The full 10-bit ADC result is given by
{ADCD_H[7:0], ADCD_L[7:6]}. Reading the ADC Data High Byte register latches data
in the ADC Low Bits register
.
Table 86. ADC Data High Byte Register (ADCD_H)
BITS
7
6
5
4
3
2
1
0
FIELD
ADCD_H
RESET
X
R/W
R
ADDR
F72H
ADCD_H—ADC Data High Byte
This byte contains the upper eight bits of the 10-bit ADC output. These bits are not valid
during a single-shot conversion. During a continuous conversion, the last conversion out-
put is held in this register. These bits are undefined after a Reset.
ADC Data Low Bits Register
The ADC Data Low Bits register (Table 87) contains the lower two bits of the conversion
value. The data in the ADC Data Low Bits register is latched each time the ADC Data
High Byte register is read. Reading this register always returns the lower two bits of the
conversion last read into the ADC High Byte register. Access to the ADC Data Low Bits
PS019915-1005
Analog-to-Digital Converter