LAN9311 Datasheet, PDF (208/461 Pages) SMSC Corporation – Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface

Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Datasheet
14.2.5.7
Port x 1588 Sequence ID, Source UUID High-WORD Transmit Capture Register
(1588_SEQ_ID_SRC_UUID_HI_TX_CAPTURE_x)
Offset:
Port 1: 118h
Port 2: 138h
Port 0: 158h
Size:
32 bits
BITS
DESCRIPTION
31:16
15:0
Sequence ID (SEQ_ID)
This field contains the Sequence ID from the 1588 Sync or Delay_Req
packet.
Source UUID High (SRC_UUID_HI)
This field contains the high 16-bits of the Source UUID from the 1588 Sync
or Delay_Req packet.
TYPE
RO
RO
DEFAULT
0000h
0000h
Note: The selection between Sync or Delay_Req packets is based on the corresponding
master/slave bit in the 1588 Configuration Register (1588_CONFIG).
Note: There are multiple instantiations of this register, one for each port of the LAN9311/LAN9311i.
Refer to Section 14.2.5 for additional information.
Note: For Port 0(Host MAC), receive is defined as data from the switch fabric, while transmit is to
the switch fabric.
Revision 2.0 (02-14-13)
208
DATASHEET
SMSC LAN9311/LAN9311i