LAN9311 Datasheet, PDF (180/461 Pages) SMSC Corporation – Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface

Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Datasheet
14.2.1.4 FIFO Level Interrupt Register (FIFO_INT)
Offset:
068h
Size:
32 bits
This read/write register configures the limits where the RX/TX Data and Status FIFO’s will generate
system interrupts.
BITS
DESCRIPTION
31:24
TX Data Available Level
The value in this field sets the level, in number of 64 Byte blocks, at which
the TX Data FIFO Available Interrupt (TDFA) will be generated. When the
TX Data FIFO free space is greater than this value, a TX Data FIFO
Available Interrupt (TDFA) will be generated in the Interrupt Status Register
(INT_STS).
23:16
TX Status Level
The value in this field sets the level, in number of DWORD’s, at which the
TX Status FIFO Level Interrupt (TSFL) will be generated. When the TX
Status FIFO used space is greater than this value, a TX Status FIFO Level
Interrupt (TSFL) will be generated in the Interrupt Status Register
(INT_STS).
15:8 RESERVED - This field must be written with 00h for proper operation.
7:0 RX Status Level
The value in this field sets the level, in number of DWORD’s, at which the
RX Status FIFO Level Interrupt (RSFL) will be generated. When the RX
Status FIFO used space is greater than this value, a RX Status FIFO Level
Interrupt (RSFL) will be generated in the Interrupt Status Register
(INT_STS).
TYPE
R/W
R/W
R/W
R/W
DEFAULT
48h
00h
00h
00h
Revision 2.0 (02-14-13)
180
DATASHEET
SMSC LAN9311/LAN9311i