LAN9311 Datasheet, PDF (194/461 Pages) SMSC Corporation – Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface

Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Datasheet
BITS
12
11:0
DESCRIPTION
GPIO 8 Clock Event Polarity (GPIO_EVENT_POL_8)
This bit determines if the 1588 clock event output on GPIO 8 is active high
or low.
0: 1588 clock event output active low
1: 1588 clock event output active high
GPIO Buffer Type 11-0 (GPIOBUF[11:0])
This field sets the buffer types of the 12 GPIO pins.
0: Corresponding GPIO pin configured as an open-drain driver
1: Corresponding GPIO pin configured as a push/pull driver
As an open-drain driver, the output pin is driven low when the corresponding
data register is cleared, and is not driven when the corresponding data
register is set.
As an open-drain driver used for 1588 Clock Events, the corresponding
GPIO_EVENT_POL_8 and GPIO_EVENT_POL_9 bits determine when the
corresponding pin is driven per the following table:
GPIOx Clock Event Polarity
0
0
1
1
1588 Clock Event
no
yes
no
yes
Pin State
not driven
driven low
driven low
not driven
TYPE
R/W
R/W
DEFAULT
1b
0h
Revision 2.0 (02-14-13)
194
DATASHEET
SMSC LAN9311/LAN9311i