LAN9311 Datasheet, PDF (136/461 Pages) SMSC Corporation – Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface

Two Port 10/100 Managed Ethernet Switch with 16-Bit Non-PCI CPU Interface
Datasheet
read them as shown in Figure 9.9. It is assumed that the host has previously read the associated
status word from the RX Status FIFO, to ascertain the data size and any error conditions.
9.9.3
Host Read
Order
1st
2nd
Last
31
0
Optional offset DWORD0
.
.
Optional offset DWORDn
ofs + First Data DWORD
.
.
.
.
Last Data DWORD
Optional Pad DWORD0
.
.
Optional Pad DWORDn
Figure 9.9 RX Packet Format
RX Status Format
Note: Though the Host MAC is communicating locally with the switch fabric MAC, the events
described in the RX Status word may still occur.
BITS
31
30
29:16
15
14
13
12
11
10
9:8
DESCRIPTION
Reserved. This bit is reserved. Reads 0.
Filtering Fail. When set, this bit indicates that the associated frame failed the address recognizing
filtering.
Packet Length. The size, in bytes, of the corresponding received frame.
Error Status (ES). When set this bit indicates that the Host MAC Interface Layer (MIL) has reported
an error. This bit is the Internal logical “or” of bits 11,7,6 and 1.
Reserved. These bits are reserved. Reads 0.
Broadcast Frame. When set, this bit indicates that the received frame has a Broadcast address.
Length Error (LE). When set, this bit indicates that the actual length does not match with the
length/type field of the received frame.
Runt Frame. When set, this bit indicates that frame was prematurely terminated before the collision
window (64 bytes). Runt frames are passed on to the host only if the Pass Bad Frames bit (PASSBAD)
of the Host MAC Control Register (HMAC_CR) is set.
Multicast Frame. When set, this bit indicates that the received frame has a Multicast address.
Reserved. These bits are reserved. Reads 0.
Revision 2.0 (02-14-13)
136
DATASHEET
SMSC LAN9311/LAN9311i