MC68HC05PV8 Datasheet, PDF (177/196 Pages) Freescale Semiconductor, Inc – Techinal Data - rev 1.9

Freescale Semiconductor, Inc.
Electrical Specifications
Supply Current
the VSCAL bit in the MFTEST register.
7. Low Side Drivers and Die Temperature Monitor can be disabled by setting LSOFF bit in
the MFTEST register.
8. The Die Temperature Monitor is only disabled when the LSOFF bit is set and the Port C4
DDR bit is cleared as well.
9. There are two common reference blocks for PC0-4, one for contacts to Vbat and one for
contacts to ground.
10. This current is proportional to V_SUP.
11. The ISO9141 driver can be disabled by clearing the PCDDR4 bit.
12. The Port C Inputs can be disabled by setting the HVTOFF bit in the MFTEST register.
13. Low Side Drivers must be switched off.
14. Comparators are automatically enabled with the corresponding output.
15. Ultra Low Power Mode is only available on MC68HC05PV8A. All I/O pins must be pulled
to levels near VSS or VDD/VSUP resp..
16. 6V < VSUP < 12V.
17. In Ultra Low Power Mode, no external load on VDD, Port A or Port B is allowed.
MC68HC(8)05PV8/A — Rev. 1.9
Electrical Specifications
For More Information On This Product,
Go to: www.freescale.com
Technical Data