MC68HC05PV8 Datasheet, PDF (146/196 Pages) Freescale Semiconductor, Inc – Techinal Data - rev 1.9

Technical Data
Freescale Semiconductor, Inc.
10.10.4 Offset Error
The offset error is the DC shift of the entire transfer curve of an ideal
converter.
10.10.5 Gain Scale Error
The gain error is an error in the input to output transfer ratio. Gain error
causes an error in the slope of the transfer curve.
10.10.6 Differential Linearity Error
The differential linearity error is the difference between actual analog
voltage change and the ideal (1LSB) voltage change at any code
change.
10.10.7 Integral Linearity Error
The integral linearity error is the deviation from the best fitting line
through all A/D code changes.
10.10.8 Total Unadjusted Error
The total unadjusted error is the maximum error that occurs without
adjusting offset and gain errors. This error is a combination of offset,
scale and integral linearity errors.
Technical Data
MC68HC(8)05PV8/A — Rev. 1.9
Analog to Digital Converter
For More Information On This Product,
Go to: www.freescale.com