MC68HC05PV8 Datasheet, PDF (133/196 Pages) Freescale Semiconductor, Inc – Techinal Data - rev 1.9

Freescale Semiconductor, Inc.
16-Bit Programmable Timer
Registers
FOLV1 – Force Output Level 1
The FOLV1 bit always reads as zero. Writing a zero at this position
has no effect. Writing a one at this position will force the OLVL1 bit to
the corresponding output level latch, thus appearing at pin TCMP1.
Note that the force output compare 1 does not affect the OCF1 bit of
the status register.
OLVL1 – Output Level 1
Value of output level is clocked into output level register by the next
successful output compare 1 and will appear on the TCMP1 pins.
1 = High output
0 = Low output
CLK12 – Output Compare 1 clocks output latch 2
If this bit is set to 1, a successful compare of compare register 1 loads
the OLVL1 bit to the output latch 2. This feature can be used to get
output pulses as short a E/4 while using only one interrupt.
FOLV2 – Force Output Level 2
The FOLV2 bit always reads as zero. Writing a zero at this position
has no effect. Writing a one at this position will force the OLVL2 bit to
the corresponding output level latch thus appearing at pin TCMP2.
Note that the force output compare 2 does not affect the OCF2 bit of
the status register.
OLVL2 – Output Level 2
Value of output level is clocked into output level register by the next
successful output compare 2, and will appear on the TCMP2 pin.
1 = High output
0 = Low output
MC68HC(8)05PV8/A — Rev. 1.9
16-Bit Programmable Timer
For More Information On This Product,
Go to: www.freescale.com
Technical Data