Z8F0113HJ005EG Datasheet, PDF (214/245 Pages) Zilog, Inc. – High-Performance 8-Bit Microcontrollers

Z8 Encore! XP^® F0823 Series
Product Specification
199
Symbol
I_DD Stop
I_DD Halt
Table 122. Power Consumption
Parameter
Supply Current in STOP
Mode
Supply Current in HALT
Mode (with all peripher-
als disabled)
V_DD = 2.7 V to 3.6 V
Maximum² Maximum³
Typical¹ Std Temp Ext Temp Units Conditions
0.1
2
7.5
µA No peripherals enabled.
All pins driven to V_DD or
V_SS.
35
55
65
µA 32kHz.
520
630
700
µA 5.5MHz.
I_DD
Supply Current in
2.8
4.5
4.8
mA 32kHz.
ACTIVE Mode (with all
4.5
5.2
5.2
mA 5.5MHz.
peripherals disabled)
I_DD WDT Watchdog Timer Sup-
0.9
1.0
1.1
µA
ply Current
I_DD IPO Internal Precision Oscil- 350
500
550
µA
lator Supply Current
I_DD VBO Voltage Brown-Out Sup- 50
ply Current
µA For 20-/28-pin devices
(VBO only).⁴
For 8-pin devices.⁴
I_DD ADC Analog-to-Digital Con-
2.8
3.1
3.2
mA 32kHz.
verter Supply Current
3.1
3.6
3.7
mA 5.5MHz.
(with External Refer-
ence)
3.3
3.7
3.8
mA 10MHz.
3.7
4.2
4.3
mA 20MHz.
I_DD
ADC Internal Refer-
0
ADCRef ence Supply Current
µA See Note 4.
I_DD CMP Comparator supply Cur- 150
180
190
µA See Note 4.
rent
I_DD BG Band Gap Supply Cur-
320
480
500
µA For 20-/28-pin devices.
rent
For 8-pin devices.
Notes:
1. Typical conditions are defined as V_DD = 3.3 V and +30°C.
2. Standard temperature is defined as T_A = 0°C to +70°C; these values not tested in production for worst case
behavior, but are derived from product characterization and provided for design guidance only.
3. Extended temperature is defined as T_A = –40°C to +105°C; these values not tested in production for worst case
behavior, but are derived from product characterization and provided for design guidance only.
4. For this block to operate, the bandgap circuit is automatically turned on and must be added to the total supply
current. This bandgap current is only added once, regardless of how many peripherals are using it.
PS024315-1011
PRELIMINARY
DC Characteristics