Z8F0113HJ005EG Datasheet, PDF (212/245 Pages) Zilog, Inc. – High-Performance 8-Bit Microcontrollers

Z8 Encore! XP^® F0823 Series
Product Specification
197
DC Characteristics
Table 121 lists the DC characteristics of the Z8 Encore! XP F0823 Series products. All
voltages are referenced to V_SS, the primary system ground.
Table 121. DC Characteristics
T_A = –40°C to +105°C
(unless otherwise specified)
Symbol Parameter
Minimum Typical Maximum Units Conditions
V_DD
Supply Voltage
2.7
V_IL1
Low Level Input
–0.3
Voltage
–
3.6
V
–
0.3*V_DD
V
V_IH1
High Level Input 0.7*V_DD
–
Voltage
5.5
V For all input pins without analog
or oscillator function. For all sig-
nal pins on the 8-pin devices.
Programmable pull-ups must
also be disabled.
V_IH2
High Level Input 0.7*V_DD
–
V_DD+0.3 V For those pins with analog or
Voltage
oscillator function (20-/28-pin
devices only), or when pro-
grammable pull-ups are
enabled.
V_OL1
Low Level Output
–
–
0.4
V I_OL = 2mA; V_DD = 3.0V
Voltage
High Output Drive disabled.
V_OH1
High Level Output
2.4
–
Voltage
–
V I_OH = –2mA; V_DD = 3.0V
High Output Drive disabled.
V_OL2
Low Level Output
–
–
0.6
V I_OL = 20mA; V_DD = 3.3 V
Voltage
High Output Drive enabled.
V_OH2
High Level Output
2.4
–
Voltage
–
V I_OH = –20mA; V_DD = 3.3 V
High Output Drive enabled.
I_IH
Input Leakage Cur- –
+0.002
+5
µA V_IN = V_DD
rent
V_DD = 3.3 V
I_IL
Input Leakage Cur- –
+0.007
+5
µA V_IN = V_SS
rent
V_DD = 3.3 V
I_TL
Tristate Leakage
–
–
+5
µA
Current
Notes:
1. This condition excludes all pins that have on-chip pull-ups, when driven Low.
2. These values are provided for design guidance only and are not tested in production.
PS024315-1011
PRELIMINARY
DC Characteristics