Z8F0113HJ005EG Datasheet, PDF (126/245 Pages) Zilog, Inc. – High-Performance 8-Bit Microcontrollers

Z8 Encore! XP^® F0823 Series
Product Specification
111
Bit
[2]
TDRE
[1]
TXE
[0]
CTS
Description (Continued)
Transmitter Data Register Empty
This bit indicates that the UART Transmit Data Register is empty and ready for additional data.
Writing to the UART Transmit Data Register resets this bit.
0 = Do not write to the UART Transmit Data Register.
1 = The UART Transmit Data Register is ready to receive an additional byte to be transmitted.
Transmitter Empty
This bit indicates that the transmit shift register is empty and character transmission is finished.
0 = Data is currently transmitting.
1 = Transmission is complete.
CTS Signal
When this bit is read, it returns the level of the CTS signal. This signal is active Low.
UART Status 1 Register
This register contains multiprocessor control and status bits.
Table 67. UART Status 1 Register (U0STAT1)
Bit
7
6
5
4
3
2
Field
Reserved
RESET
0
0
0
0
0
0
R/W
R
R
R
R
R/W
R/W
Address
F44H
1
NEWFRM
0
R
0
MPRX
0
R
Bit
[7:2]
[1]
NEWFRM
[0]
MPRX
Description
Reserved
These bits are reserved; R/W bits must be programmed to 000000 during writes and
000000 when read.
New Frame
A status bit denoting the start of a new frame. Reading the UART Receive Data Register
resets this bit to 0.
0 = The current byte is not the first data byte of a new frame.
1 = The current byte is the first data byte of a new frame.
Multiprocessor Receive
Returns the value of the most recent multiprocessor bit received. Reading from the UART
Receive Data Register resets this bit to 0.
PS024315-1011
PRELIMINARY
UART Control Register Definitions