Z8F0113HJ005EG Datasheet, PDF (211/245 Pages) Zilog, Inc. – High-Performance 8-Bit Microcontrollers

Z8 Encore! XP^® F0823 Series
Product Specification
196
Electrical Characteristics
The data in this chapter represents all known data prior to qualification and characteriza-
tion of the F0823 Series of products, and is therefore subject to change. Additional electri-
cal characteristics may be found in the individual chapters of this document.
Absolute Maximum Ratings
Stresses greater than those listed in Table 120 may cause permanent damage to the device.
These ratings are stress ratings only. Operation of the device at any condition outside those
indicated in the operational sections of these specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
For improved reliability, tie unused inputs to one of the supply voltages (V_DD or V_SS).
Table 120. Absolute Maximum Ratings
Parameter
Ambient temperature under bias
Storage temperature
Voltage on any pin with respect to V_SS
Voltage on V_DD pin with respect to V_SS
Maximum current on input and/or inactive output pin
Maximum output current from active output pin
Minimum Maximum
–40
+105
–65
+150
–0.3
+5.5
–0.3
+3.9
–0.3
+3.6
–5
+5
–25
+25
Units
°C
°C
V
V
V
µA
mA
Notes
1
2
8-pin Packages Maximum Ratings at 0°C to 70°C
Total power dissipation
220
mW
Maximum current into V_DD or out of V_SS
60
mA
20-pin Packages Maximum Ratings at 0°C to 70°C
Total power dissipation
430
mW
Maximum current into V_DD or out of V_SS
120
mA
28-pin Packages Maximum Ratings at 0°C to 70°C
Total power dissipation
450
mW
Maximum current into V_DD or out of V_SS
125
mA
Notes: Operating temperature is specified in DC Characteristics.
1. This voltage applies to all pins except the following: V_DD, AV_DD, pins supporting analog input (Port B[5:0], Port
C[2:0]) and pins supporting the crystal oscillator (PA0 and PA1). On the 8-pin packages, this applies to all pins
but V_DD.
2. This voltage applies to pins on the 20/28 pin packages supporting analog input (Port B[5:0], Port C[2:0]) and pins
supporting the crystal oscillator (PA0 and PA1).
PS024315-1011
PRELIMINARY
Electrical Characteristics