HD64F7045F28V Datasheet, PDF (731/925 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH RISC engine Family/SH7040 Series

Bit 5: ESU1
0
1
Description
Erase setup release (Initial value)
Erase setup
[Setting condition] When FWE=1 and SWE=1
• Bit 4—Program Setup Bit 1 (PSU1): Prepares for a transition to program mode (applicable
addresses: H'00000–H'1FFFFF). Do not set the SWE, ESU1, EV1, PV1, E1, or P1 bit at the
same time.
Bit 4: PSU1
0
1
Description
Program setup release (Initial value)
Program setup
[Setting condition] When FWE=1 and SWE=1
• Bit 3—Erase-Verify 1 (EV1): Selects erase-verify mode transition or release (applicable
addresses: H'00000–H'1FFFF). Do not set the SWE, ESU1, PSU1, PV1, E1, or P1 bit at the
same time.
Bit 3: EV1
0
1
Description
Erase verify mode release (Initial value)
Transition to erase verify mode
[Setting condition] When FWE=1 and SWE=1
• Bit 2—Program-Verify 1 (PV1): Selects program-verify mode transition or release (applicable
addresses: H'00000–H'1FFFF). Do not set the SWE, ESU1, PSU1, EV1, E1, or P1 bit at the
same time.
Bit 2: PV1
0
1
Description
Program verify mode release (Initial value)
Transition to program verify mode
[Setting condition] When FWE=1 and SWE=1
691