HD64F7045F28V Datasheet, PDF (267/925 Pages) Renesas Technology Corp – Renesas 32-Bit RISC Microcomputer SuperH RISC engine Family/SH7040 Series

• Bits 9–8—Priority Mode 1 and 0 (PR1 and PR0): These bits determine the priority level of
channels for execution when transfer requests are made for several channels simultaneously.
Bit 9: PR1
0
0
1
1
Bit 8: PR0
0
1
0
1
Description
CH0 > CH1 > CH2 > CH3 (initial value)
CH0 > CH2 > CH3 > CH1
CH2 > CH0 > CH1 > CH3
Round robin mode
• Bits 7–3—Reserved bits: Data are 0 when read. The write value always be 0.
• Bit 2—Address Error Flag (AE): Indicates that an address error has occurred during DMA
transfer. If this bit is set during a data transfer, transfers on all channels are suspended. The
CPU cannot write a 1 to the AE bit. Clearing is effected by 0 write after 1 read.
Bit 2: AE
0
1
Description
No address error, DMA transfer enabled (initial value)
Clearing condition: Write AE = 0 after reading AE = 1
Address error, DMA transfer disabled
Setting condition: Address error due to DMAC
• Bit 1—NMI Flag (NMIF): Indicates input of an NMI. This bit is set irrespective of whether the
DMAC is operating or suspended. If this bit is set during a data transfer, transfers on all
channels are suspended. The CPU is unable to write a 1 to the NMIF. Clearing is effected by a
0 write after 1 read.
Bit 1: NMIF
0
1
Description
No NMI interrupt, DMA transfer enabled (initial value)
Clearing condition: Write NMIF = 0 after reading NMIF = 1
NMI has occurred, DMC transfer prohibited
Set condition: NMI interrupt occurrence
227