MC68HC08AS20 Datasheet, PDF (200/386 Pages) Freescale Semiconductor, Inc – M68HC08 Microcontrollers

16.2 Introduction
This section describes the timer interface module (TIM6). The TIM is a
6-channel timer that provides a timing reference with input capture,
output compare, and pulse-width-modulation functions. Figure 16-1 is a
block diagram of the TIM.
16.3 Features
Features of the TIM include:
• Six Input Capture/Output Compare Channels
– Rising-Edge, Falling-Edge, or Any-Edge Input Capture Trigger
– Set, Clear, or Toggle Output Compare Action
• Buffered and Unbuffered Pulse Width Modulation (PWM) Signal
Generation
• Programmable TIM Clock Input
– 7-Frequency Internal Bus Clock Prescaler Selection
– External TIM Clock Input (4-MHz Maximum Frequency)
• Free-Running or Modulo Up-Count Operation
• Toggle Any Channel Pin on Overflow
• TIM Counter Stop and Reset Bits
• Modular Architecture Expandable to Eight Channels in Hardware
But Not Expandable in Software
Advance Information
200
MC68HC08AS20 —Rev. 4.1
Freescale Semiconductor