M16C62_M Datasheet, PDF (194/615 Pages) Renesas Technology Corp – 16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY / M16C/60 SERIES

Electrical characteristics
Mitsubishi microcomputers
M16C / 62A Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Table 1.23.2. Recommended operating conditions (referenced to VCC = 2.7V to 5.5V at Topr = – 20^oC
to 85^oC / – 40^oC to 85^oC (Note 3) unless otherwise specified)
Symbol
Vcc
AVcc
Vss
AVss
Supply voltage
Analog supply voltage
Supply voltage
Analog supply voltage
Parameter
Standard
Min Typ. Max. ^Unit
2.7
5.0
5.5
V
Vcc
V
0
V
0
V
HIGH input ^{P31 to P37, P40 to P47, P50 to P57, P60 to P67,}
voltage
P72 to P77, P80 to P87, P90 to P97, P100 to P107,
VIH
XIN, RESET, CNVSS, BYTE
0.8Vcc
P70 ,P71
0.8Vcc
P00 to P07, P10 to P17, P20 to P27, P30 (during single-chip mode)
0.8Vcc
P00 to P07, P10 to P17, P20 to P27, P30
0.5Vcc
(data input function during memory expansion and microprocessor modes)
Vcc
V
6.5
V
Vcc
V
Vcc
V
LOW input P31 to P37, P40 to P47, P50 to P57, P60 to P67,
voltage
P70 to P77, P80 to P87, P90 to P97, P100 to P107,
0
VIL
XIN, RESET, CNVSS, BYTE
P00 to P07, P10 to P17, P20 to P27, P30 (during single-chip mode)
0
0.2Vcc _V
0.2Vcc V
P00 to P07, P10 to P17, P20 to P27, P30
(data input function during memory expansion and microprocessor modes)
0
0.16Vcc V
HIGH peak output
I OH (peak) _current
P00 to P07, P10 to P17, P20 to P27, P30 to P37,
P40 to P47, P50 to P57, P60 to P67, P72 to P77,
P80 to P84, P86, P87, P90 to P97, P100 to P107
-10.0
mA
HIGH average output
I OH (avg) current
P00 to P07, P10 to P17, P20 to P27, P30 to P37,
P40 to P47, P50 to P57, P60 to P67, P72 to P77,
P80 to P84, P86, P87, P90 to P97, P100 to P107
-5.0
mA
LOW peak output
I OL (peak) current
LOW average
I OL (avg) _{output current}
P00 to P07, P10 to P17, P20 to P27, P30 to P37,
P40 to P47, P50 to P57, P60 to P67, P70 to P77,
P80 to P84, P86, P87, P90 to P97, P100 to P107
P00 to P07, P10 to P17, P20 to P27, P30 to P37,
P40 to P47, P50 to P57, P60 to P67, P70 to P77,
P80 to P84, P86, P87, P90 to P97, P100 to P107
10.0
mA
5.0
mA
Mask ROM version, Vcc=4.2V to 5.5V
0
No wait Flash memory 5V
f (XIN) ^{Main clock input}
version (Note 5)
Vcc=2.7V to 4.2V
0
oscillation frequency
Mask ROM version, Vcc=4.2V to 5.5V
0
With wait Flash memory 5V
version (Note 5)
Vcc=2.7V to 4.2V
0
f (XcIN) Subclock oscillation frequency
16
MHz
7.33 X Vcc
-14.791
MHz
16
MHz
32.768
4 X Vcc
-0.8
50
MHz
kHz
Note 1: The mean output current is the mean value within 100ms.
Note 2: The total IOL (peak) for ports P0, P1, P2, P86, P87, P9, and P10 must be 80mA max. The total IOH (peak) for ports P0, P1,
P2, P86, P87, P9, and P10 must be 80mA max. The total IOL (peak) for ports P3, P4, P5, P6, P7, and P80 to P84 must be
80mA max. The total IOH (peak) for ports P3, P4, P5, P6, P72 to P77, and P80 to P84 must be 80mA max.
Note 3: Specify a product of -40°C to 85°C to use it.
Note 4: Relationship between main clock oscillation frequency and supply voltage.
Main clock input oscillation frequency
(Mask ROM, Flash memory 5V version, No wait)
Main clock input oscillation frequency
(Mask ROM, Flash memory 5V version, With wait)
16.0
7.33 X VCC - 14.791MHZ
16.0
4 X VCC - 0.8MHZ
10.0
5.0
0.0
2.7
4.2
5.5
Supply voltage[V]
(BCLK: no division)
0.0
2.7
4.2
5.5
Supply voltage[V]
(BCLK: no division)
Note 5: Execute case without wait, program / erase of flash memory by VCC=4.2V to 5.5V and f(BCLK) ≤ 6.25 MHz. Execute case
with wait, program / erase of flash memory by VCC=4.2V to 5.5V and f(BCLK) ≤ 12.5 MHz.
1-175